RTT 官方瑞萨HMI开发板pwm驱动使用

/*
* Copyright (c) 2006-2021, RT-Thread Development Team
 *
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018-05-07 aozima the first version
* 2022-09-24 yuqi add phase and dead time configuration
*/
#ifndef __DRV_PWM_H_INCLUDE__
#define __DRV_PWM_H_INCLUDE__
#include <rtthread.h>
//输出开关
#define PWM_CMD_ENABLE (RT_DEVICE_CTRL_BASE(PWM) + 0)
#define PWM_CMD_DISABLE (RT_DEVICE_CTRL_BASE(PWM) + 1)
//pwm输出占空比和设置获取
#define PWM_CMD_SET (RT_DEVICE_CTRL_BASE(PWM) + 2)
#define PWM_CMD_GET (RT_DEVICE_CTRL_BASE(PWM) + 3)
//互补输出开关
#define PWMN_CMD_ENABLE (RT_DEVICE_CTRL_BASE(PWM) + 4)
#define PWMN_CMD_DISABLE (RT_DEVICE_CTRL_BASE(PWM) + 5)
//设置定时器的重载值
#define PWM_CMD_SET_PERIOD (RT_DEVICE_CTRL_BASE(PWM) + 6)
//设置比较值
#define PWM_CMD_SET_PULSE (RT_DEVICE_CTRL_BASE(PWM) + 7)
//设置死区时间
#define PWM_CMD_SET_DEAD_TIME (RT_DEVICE_CTRL_BASE(PWM) + 8)
//设置相位
#define PWM_CMD_SET_PHASE (RT_DEVICE_CTRL_BASE(PWM) + 9)
//开关中断
#define PWM_CMD_ENABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 10)
#define PWM_CMD_DISABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 11)
struct rt_pwm_configuration
{
rt_uint32_t channel; /* 0 ~ n or 0 ~ -n, which depends on specific MCU requirements */
rt_uint32_t period; /* unit:ns 1ns~4.29s:1Ghz~0.23hz */
rt_uint32_t pulse; /* unit:ns (pulse<=period) */
rt_uint32_t dead_time; /* unit:ns */
rt_uint32_t phase; /*unit: degree, 0~360, which is the phase of pwm output, */
/*
* RT_TRUE : The channel of pwm is complememtary.
* RT_FALSE : The channel of pwm is nomal.
*/
rt_bool_t complementary;
};
struct rt_device_pwm;
//pwm 控制函数，根据不同的命令分别执行不同的控制函数
struct rt_pwm_ops
{
rt_err_t (*control)(struct rt_device_pwm *device, int cmd, void *arg);
};
//rtt pwm驱动框架的设备注册对象类型
struct rt_device_pwm
{
struct rt_device parent;
const struct rt_pwm_ops *ops;
};
//pwm 对象的设备注册函数
rt_err_t rt_device_pwm_register(struct rt_device_pwm *device, const char *name, const struct rt_pwm_ops *ops, const void *user_data);
/*设置pwm的使能和失能*/
rt_err_t rt_pwm_enable(struct rt_device_pwm *device, int channel);
rt_err_t rt_pwm_disable(struct rt_device_pwm *device, int channel);
/*设置pwm的频率和占空比*/
rt_err_t rt_pwm_set(struct rt_device_pwm *device, int channel, rt_uint32_t period, rt_uint32_t pulse);
rt_err_t rt_pwm_set_period(struct rt_device_pwm *device, int channel, rt_uint32_t period);
rt_err_t rt_pwm_set_pulse(struct rt_device_pwm *device, int channel, rt_uint32_t pulse);
/*设置pwm的死区时间*/
rt_err_t rt_pwm_set_dead_time(struct rt_device_pwm *device, int channel, rt_uint32_t dead_time);
/*设置pwm的相位*/
rt_err_t rt_pwm_set_phase(struct rt_device_pwm *device, int channel, rt_uint32_t phase);
#endif /* __DRV_PWM_H_INCLUDE__ */

//自定义应用层pwm使用实例
void open_pwm_output(void)
{
#ifdef BSP_USING_PWM1
#define LCD_PWM_DEV_NAME "pwm1"
#define LCD_PWM_DEV_CHANNEL 0
struct rt_device_pwm *pwm_dev;
/* turn on the LCD backlight */
pwm_dev = (struct rt_device_pwm *)rt_device_find(LCD_PWM_DEV_NAME);
/* pwm frequency:100K = 10000ns */
rt_pwm_set(pwm_dev, LCD_PWM_DEV_CHANNEL, 10000, 7000);
rt_pwm_enable(pwm_dev, LCD_PWM_DEV_CHANNEL);
#endif
}